:)
Hi all.
Any idea what year BSA started to put the alternator shroud/cover on the A50/A65.
I'm doing two engines.1963/4 which I know didn't have and a later one of indeterminate (at moment) age.
My thoughts are that it was about 65/66. I am missing the shroud and wondering about putting it together in the same way as the early one.
Mike 8) 8) 8)
I had same issue with rebuild recently, i used the early mounting hex rods on later crankcases.
the only issue i had was that the studs were slightly too long and ended up locking the crankshaft up :o
After i spaced them out they were fine, not exactly text book but works fine.
;)
derek
:)
I was hoping that would work. Where did you obtain the early rods because I actually need a set of those as well.
Mike 8) 8)
Hi Mike,
They came off my other engine, i had a look and dont have any other ones.
I am probably like you and have lots of the same things i dont need, and none of the bits i do!
Ebay ;)
cheers
Draganfly list them
https://www.draganfly.co.uk/index.php/triumph-shop/twin-cylinder/product/29734-alternator-support-stud/category_pathway-2
is it same?
;)