Print Page - C11G Camshaft

Title: C11G Camshaft
Post by: BeenyBoy on 04 Nov, 2018, 15:08

Hiya

Please can someone tell me how to remove the camshaft from the outer timing case on a C11G..... the Service sheet isnt very helpful other than suggesting a circlip- but I cant find one

ta

Title: Re: C11G Camshaft
Post by: JulianS on 04 Nov, 2018, 16:45

I think the circlip is on the shaft for the rocking arm which operates the pushrod.

Title: Re: C11G Camshaft
Post by: BeenyBoy on 04 Nov, 2018, 17:17

Hi - not sure where you mean- pix attached

cheers

Title: Re: C11G Camshaft
Post by: JulianS on 04 Nov, 2018, 19:09

You need to remove the base of the autoadvance mechanism, which is on a taper.

The page below is from Pitmans Book of 250 BSA, and explains how to do it.

Title: Re: C11G Camshaft
Post by: BeenyBoy on 04 Nov, 2018, 20:18

Thanks Julian- thats cleared it up

cheers

BSA Owners' Club Workshop Discussions

The BSA Workshop => Singles => Topic started by: BeenyBoy on 04 Nov, 2018, 15:08