Hello people
Time for engine oil change.
Decided to clean out sump sludge trap.
Filter has TWO holes so not filtering ??
Can anyone help
Can't find a source for new filter
So off the road at the moment
Regards
Tim
Have you tried Burton Bike Bits (See BSAOC Links)? They supplied me with a new filter and banjo bolt for my B44R.
Thanks
Burton list two but neither are available
They show as in stock here.
https://www.classicbikeshop.co.uk/air-oil-and-fuel-filters/oil-fuel-filters/bsa.html
Mark
Thanks Mark
These fit B25. B44. B50
My C15 is rectangular.
Hi. I have a late model engine with side points. The gauze has 2 holes in it as there is an additional pipe in the crankcase & fits with the raised part uppermost.
Regards,
Dave
Dave
Thanks for that,not sure what to do next.
Engine came with the crankcase assembled.
I have completed about 300 miles since rebuild everything seems fine.
I also have side point and crankcase marked SS80
No sign of any other pipe near the sludge trap.
WHAT TO DO
PERHAPS someone with further knowledge can help ???
Tim
Further to the two hole mystery.
R.R. Page 30 show three pictures of the lubrication system all showing ONE pipe ??
Dave
Further reading of R.R. Says later engine fitted with a second pipe AS YOU SAID.
This carries oil from the pressure release valve.
On closer inspection my engine has a second pipe.
I put not at first seeing this down to my great age !!
Difficult to gain a view underneath.
Thanks to all who answered
Regards
Tim