Text only | Text with Images

BSA Owners' Club Workshop Discussions

The BSA Workshop => Singles => Topic started by: LEMMY69 on 03 Apr, 2018, 14:05

Title: BSA B33 Engine Oil Gauge mounting
Post by: LEMMY69 on 03 Apr, 2018, 14:05

Hello

I would like to indicate the Oil preasure from the BSA B33 Engine.

Is it possible to drill a hole with a thread at the side cover to  mount a Oil Gauge somewhere at the handlebar.

Lemmy69


l
Title: Re: BSA B33 Engine Oil Gauge mounting
Post by: ANDY HIGHAM on 03 Apr, 2018, 16:26
There is very little oil pressure on a B33, probably won't even register on a gauge. It is a Roller bearing engine so its oil flow rate that matters
Title: Re: BSA B33 Engine Oil Gauge mounting
Post by: LEMMY69 on 19 Apr, 2018, 11:23

ok thank you

so  there will be no gauge.

would you recommend a Magnetic OIL Drain Screw in the lower Oil plate.

I  just want to provide the engine of damage.

regards

Lemmy
Title: Re: BSA B33 Engine Oil Gauge mounting
Post by: Dean Southall on 19 Apr, 2018, 12:41
The magnetic oil drain plug is very worthwhile. As much to provide an easy way to check/drain excess sump oil if the bike has been standing for a while as to attract ferrous impurities,.
Text only | Text with Images