Print Page - B33 Primary Chaincase Gasket

Title: B33 Primary Chaincase Gasket
Post by: Mark B on 26 Mar, 2018, 11:15

When I removed the steel primary chaincase it looked as though some previous owner had fixed the cork gasket in place with copious amounts of Araldite. I've got a new cork gasket and the two cork rings for the spacer behind the footpeg. Will these be oiltight when I put the cover back on or should I use a sealant too?

Thanks for any advice.

Title: Re: B33 Primary Chaincase Gasket
Post by: ducati2242 on 26 Mar, 2018, 20:34

loctite 518 is what i use . can be bought on ebay . there is probably an equivalent but this doesn't go hard just stays sticky .

Title: Re: B33 Primary Chaincase Gasket
Post by: Mark B on 27 Mar, 2018, 08:49

Thanks. In fact the new gasket is the wrong one, so I've got a few days to find some Loctite.

BSA Owners' Club Workshop Discussions

The BSA Workshop => Singles => Topic started by: Mark B on 26 Mar, 2018, 11:15