I'm trying to find Whitworth socket cap head screws in stainless steel. I have seen some kits, like the ones at Feked. But I wondered if there is a bolt supplier selling them individually.
Thanks
Peter.
Acmestainless do 1/4"W cap heads but not sure if they do other diameters.
Spalding Fasteners have good stick and may be able to help:
Fasteners UK | Nuts, Bolts, Screws & Fixings | Spalding Fasteners https://share.google/3yC0UvCUlk3pXYU3U
Nigel
Hi,
Try Middleton Stainless. Not necessarily the cheapest but the products are top quality.
Dave.
Quote from: Pete Lamb on 27 Oct, 2026, 08:25 I'm trying to find Whitworth socket cap head screws in stainless steel. I have seen some kits, like the ones at Feked. But I wondered if there is a bolt supplier selling them individually.
When you say "Whitworth" do you actually meaning "Whitworth"?
Grandma's eggs and all that, buy to too many people (particularly Americans) "Whitworth" is the generic term for Imperial.
Purists will object but BSW and UNC 1/4" are essentially interchangeable unless for very high stress applications. Both are 20 tpi but the thread angles are diggerent at 55 and 60 degrees respectively, as well as some trivial differences in thread profiles.
Quote from: Greenfield on 27 Oct, 2026, 09:08 Acmestainless do 1/4"W cap heads but not sure if they do other diameters.
Thanks. I will try them. It's 1/4" I need.
Pete.
Quote from: V500 on 27 Oct, 2026, 09:48 Quote from: Pete Lamb on 27 Oct, 2026, 08:25 I'm trying to find Whitworth socket cap head screws in stainless steel. I have seen some kits, like the ones at Feked. But I wondered if there is a bolt supplier selling them individually.
When you say "Whitworth" do you actually meaning "Whitworth"?
Grandma's eggs and all that, buy to too many people (particularly Americans) "Whitworth" is the generic term for Imperial.
Thanks. They are for the primary cover on the '56 B31. I was assuming they're Whitworth, but I could be wrong. Are they UNC?
This is my first Brit bike in 47 years of riding, so I'm on a steepish learning curve.
Pete.
Pete.
Quote from: NClark on 27 Oct, 2026, 09:09 Spalding Fasteners have good stick and may be able to help:
Fasteners UK | Nuts, Bolts, Screws & Fixings | Spalding Fasteners https://share.google/3yC0UvCUlk3pXYU3U
Nigel
Thanks Nigel. That's a useful contact.
Pete.
I have used several of these suppliers in the past. Acmestainless are very good.
https://acmestainless.co.uk/product-category/imperial/ (https://acmestainless.co.uk/product-category/imperial/)
https://www.stainlessmiddleton.co.uk/32936-cycle-cei-nuts-full (https://www.stainlessmiddleton.co.uk/32936-cycle-cei-nuts-full)
https://www.nookysnuts.com/ (https://www.nookysnuts.com/)
https://www.stainlessautomotivefastenings.co.uk/index.php?main_page=index&cPath=566_119_82&zenid=d1auv3s19a0qfndjamreb05mh5 (https://www.stainlessautomotivefastenings.co.uk/index.php?main_page=index&cPath=566_119_82&zenid=d1auv3s19a0qfndjamreb05mh5)
https://www.bolts.co.uk/ (https://www.bolts.co.uk/)
https://www.motalia.co.uk/screws.html (https://www.motalia.co.uk/screws.html)
Quote from: Derek996 on 27 Oct, 2026, 15:39 I have used several of these suppliers in the past. Acmestainless are very good.
https://acmestainless.co.uk/product-category/imperial/ (https://acmestainless.co.uk/product-category/imperial/)
https://www.stainlessmiddleton.co.uk/32936-cycle-cei-nuts-full (https://www.stainlessmiddleton.co.uk/32936-cycle-cei-nuts-full)
https://www.nookysnuts.com/ (https://www.nookysnuts.com/)
https://www.stainlessautomotivefastenings.co.uk/index.php?main_page=index&cPath=566_119_82&zenid=d1auv3s19a0qfndjamreb05mh5 (https://www.stainlessautomotivefastenings.co.uk/index.php?main_page=index&cPath=566_119_82&zenid=d1auv3s19a0qfndjamreb05mh5)
https://www.bolts.co.uk/ (https://www.bolts.co.uk/)
https://www.motalia.co.uk/screws.html (https://www.motalia.co.uk/screws.html)
Thanks Derek. There's a useful selection there.
Pete.
They will be Whit, you can check the club list of fasteners. 1/4 BSW cap-head are quite common so you should be able to get stainless. I prefer plated steel as its less reactive to the ally castings.
Stainless is not a nice material when screwed into cast all, the best is galv steel or plated.
If using atainless screws in an alloy casing lubricate them with Alumslip (https://www.cromwell.co.uk/shop/lubricants-and-chemicals/lubricants/alumslip-anti-seize-lubricant-500g-tin/p/MLY7031820R)
Never had the slightest problem with stainless screws in aluminium alloy.
Neither have I. I usually put a small dab of ordinary grase on them though. I don't like copaslip as it smears everywhere.
The things that matters are making sure there are no sharp edges on the thread as the stainless is hard and will cut the ally. There are a lot of poor quality stainless fasters about. Secondly keeping water out so packing in grease works. I also have a Land Rover with an ally body that lives outside, stainless fasteners on the ally are a no-no and you see the corrosion after a year of so. Plated steel is best if there's any chance of condensation. The rear trouble is if damp gets down the thread, then the thread weakens in the casting and unscrews with the bolt. The big enemy here is a damp shed with condensation.
Ray Box Engineering has supplied lots of my similar fasteners. Seems to be easy to find on eBay.