Does anyone know the correct routing for the oil pipe running up to the back of the oil tank? I've tried two ways of feeding it up from below, and neither feel right. I'm now wondering if the oil pipe is supposed to go through the hole in the middle panel? Where I have fed the ignition wires through....
both of my C15 s go through that hole that you have used with a grommet and wire going through it.
it makes a nice route then upwards into the oil return steel pipe at the back of the tank
my points wire goes into the loom connections centrally as the small loom drops down from the switch area
Thanks for that. All re-routed now!