Text only | Text with Images

BSA Owners' Club Workshop Discussions

The BSA Workshop => Singles => Topic started by: watts on 27 Sep, 2025, 13:57

Title: M21 and 4 Spring clutch push rod
Post by: watts on 27 Sep, 2025, 13:57
Hello

I was wondering has anyone done this and what length push rod did they use, all the ones I have are too short?  I bought one from Feked for the purpose but its too short maybe I have missed something?

Thank you

Matthew
Title: Re: M21 and 4 Spring clutch push rod
Post by: limeyrob on 27 Sep, 2025, 15:28
Did you buy the 12" for the 4 spring to A10?  Std is I believe 11 3/4.
All else fails get a length of 1/4" silver steel and quench the ends or saw the rod you have in half (quench ends) and put a spare 1/4 clutch roller in the middle.
Title: Re: M21 and 4 Spring clutch push rod
Post by: watts on 27 Sep, 2025, 15:39
Hello
Yes I got the 11 3/4.
I see thanks
Matthew
Text only | Text with Images