Print Page - Super Rocket head torque

Title: Super Rocket head torque
Post by: Cyclops on 08 Nov, 2017, 18:47

Can anyone advise on the correct torque value for Super Rocket cylinder head bolts. Thanks, Greg

Title: Re: Super Rocket head torque
Post by: Bess on 08 Nov, 2017, 20:22

Hi BARNFIELD,
Did you see your original post answers?

Best wishes...

Title: Re: Super Rocket head torque
Post by: Cyclops on 08 Nov, 2017, 22:54

Checked to make sure was posted but couldn't see it, hence posting a second time. Can't find any answers tho'.

Title: Re: Super Rocket head torque
Post by: DerekAnderson8 on 09 Nov, 2017, 07:51

;)

http://www.bsaownersclub.co.uk/bsaoc_forum/index.php?topic=1889.msg8093;topicseen#msg8093

Title: Re: Super Rocket head torque
Post by: Bess on 09 Nov, 2017, 09:45

Hi,
I have attached the complete A65 torque settings.

There is a service sheet describing the thick washers Julian mentioned, I cant find it at the moment. The dimensions are 3/8" X 5/8" X .104", I purchased some washers with a O/D diameter larger than 5/8" to get the thickness and turned them down. If you not got a lathe, put 5 on a fully threaded bolt, lock them with a nut and grind them down to size.

Best wishes...

BSA Owners' Club Workshop Discussions

The BSA Workshop => Twins => Topic started by: Cyclops on 08 Nov, 2017, 18:47