I have an SS80 that is have begun the 12v conversion by joining the (very dilapidated ) 3 wires into 2 at the stator.
It is now 2 wires and 12v
I have obtained by chance a Ww10124W reg rec which is a 3 phase unit , having 3 yellows .
The instructions say that it CAN be used on a 2 wire stator but don't actually show how to connect the 3 yellows onto 2 wires.
Is it a matter of leaving 1 yellow disconnected or double line it up with its yellow partner?
Many thanks in advance
I have done similar upgrades to Ducatis, using a 3-phase regulator with single phase, 2 wire single alternator. Connect your 2 wires to any of the yellow wires and leave the other yellow wire disconnected. it will work just fine like that.
Magic, thank you