Can someone confirm this is the correct orientation of the fork seal please - "open" face pointing down. Thanks
Other way round,
Always remember,
Spring towards the oil
This applies everywhere, just imaging the spring coil keeping the wiping lip tight on the shaft in the middle.
So in your case , spring down to keep the oil in the bottom fork leg
Quote from: rhyatt on 10 Feb, 2024, 13:44
Always remember,
Spring towards the oil
This applies everywhere, just imaging the spring coil keeping the wiping lip tight on the shaft in the middle.
So in your case , spring down to keep the oil in the bottom fork leg
That's a bit confusing because to me the spring is down in the picture. But I'm guessing as per the previous answer you're both saying it should be the other way.
Thanks both.
I stand corrected you do have it the right way round, I couldn't see photo very well ,I now see your image is the for seal holder ,( at first it look light bottom slider , my apologies )
Quote from: Roy on 10 Feb, 2024, 16:50
I stand corrected you do have it the right way round, I couldn't see photo very well ,I now see your image is the for seal holder ,( at first it look light bottom slider , my apologies )
Sorry not a great photo. Yes that's the end of the seal holder as it would be screwed onto the top of the slider. Thanks again.