Print Page - Oil Pipe connections

Title: Oil Pipe connections
Post by: LIONELSMITH on 23 Oct, 2023, 15:29

Simple question 1961 A10 Golden Flash The Oil feed from the Oil tank goes to the higher or lower connection to the crankcase? I thought t was lower, but as I have had the SRM crank bush conversion I have put the spring and ball bearing in the TOP right pump hole and was told this only affect the input side? This could sort my oil feed problems.
Thanks

Title: Re: Oil Pipe connections
Post by: JulianS on 23 Oct, 2023, 16:45

Feed line goes to the lower connection. Oil feeds in to the pump via the lower right hand drilling and is fed from pump to the engine from the upper right hand drilling. Connections the same for SRM end feed conversion and original bush setup.

Title: Re: Oil Pipe connections
Post by: LIONELSMITH on 23 Oct, 2023, 17:01

Thanks again Julian

BSA Owners' Club Workshop Discussions

The BSA Workshop => Twins => Topic started by: LIONELSMITH on 23 Oct, 2023, 15:29