Hi all
A quick question:- What are the two screws for in a B33 cylinder head near side? I'm guessing something to do with the oil supply to the rockers.
Hi,
They are the drill access for the oilways during manufacture, threaded and plugged with screws. It would be good to remove the screws and clean the oilways, but I have never managed to remove them. I thoroughly flush instead.
Best wishes...
Thanks Bess
It looks as though somebody had a go at getting them out in the past. There's no oil leaking through them so they can stay, at least for the moment. As long as the supply and drain oil ways are clear there shouldn't be a problem.
Cheers