Print Page - 1959 A10 GF Sludge Plugs

Title: 1959 A10 GF Sludge Plugs
Post by: Keith R on 04 Dec, 2022, 11:01

Hello,

I am hoping someone may be able to help. I have acquired two new sludge plugs for the above however each one is different.
One has a flat back and the other has a domed back. Can you advise which side of the crankshaft each should go?

From what I can gather the one with the dome should be on the LHS, but wanted to get the expert's advice first before fitting.

Thanks in advance

Title: Re: 1959 A10 GF Sludge Plugs
Post by: Wakeman on 14 Dec, 2022, 15:27

Here is a sketch I made when rebuilding an engine. That engine has long since been rebuilt and runs great

Title: Re: 1959 A10 GF Sludge Plugs
Post by: Wakeman on 14 Dec, 2022, 15:41

Here's another sketch I made back in 1992. It corresponds with the first sketch I sent

Title: Re: 1959 A10 GF Sludge Plugs
Post by: Keith R on 16 Dec, 2022, 11:49

Thanks very much Wakeman.

BSA Owners' Club Workshop Discussions

The BSA Workshop => Twins => Topic started by: Keith R on 04 Dec, 2022, 11:01