I have a A10 650 Road Rocket..I had the carburetor off.when I started it afterward,it wanted to race up.i had to shut it off.the slide looks correct.not stuck up...any ideas??
air getting in through the gaskets?
flange needs to be flat when bolting carb to inlet manifold. Amal do say, over tightening the two bolts can distort the flange.
I did the same with my suoer rocket and it was just the ferrel in th cable not seated in the top of the carb
if the cable is a bit of a tight run then it may not seat but as above , the ferrule can come out if cable not adjusted correctly or wrong one fitted.
have you got a choke? are all the parts there?, if choke not fitted is the hole in the cap plugged
Check the mounting flange is flat.