BSA Owners' Club Workshop Discussions

The BSA Workshop => Twins => Topic started by: Mick Boon on 03 Aug, 2022, 23:13

Title: Headlight rim removal.
Post by: Mick Boon on 03 Aug, 2022, 23:13

I hate to ask this, but how is the headlight rim removed on a 1956 Golden Flash ?  I need to change a light bulb, but I can see no way of removing it.

Top

(https://i.imgur.com/fu6561H.jpg)

Bottom

(https://i.imgur.com/M24ri9D.jpg)

Title: Re: Headlight rim removal.
Post by: tige on 04 Aug, 2022, 07:24
Your pics are too big to see the centre of the light, but most have a screw on the top you slack off and it releases a clip allowing the rim to come forward, and it then unclips from the bottom. Thats how my a rim comes off. assuming this one will be the same.
Title: Re: Headlight rim removal.
Post by: Spaceman on 04 Aug, 2022, 08:14
Here's the image re-scaled so people can see what's going on. As said, I would have thought the rim should have a screw for the retaining clamp in the top of the rim but I can't see one here - not sure what the pin looking object is where the screw should be?
Title: Re: Headlight rim removal.
Post by: DAVE BRADY on 04 Aug, 2022, 09:11
Hi,

A bit obvious but have you tried rotating the headlight down a bit as the screw could well be obscured by the cowl?

Dave.
Title: Re: Headlight rim removal.
Post by: idie on 04 Aug, 2022, 09:11
Slacken the two bolts holding the headlamp then tilt forward you will see the screw on the top of the headlamp. This screw goes into a L shaped clip that pull up and holds the rim on.
Title: Re: Headlight rim removal.
Post by: Mick Boon on 04 Aug, 2022, 13:12
Quote from: spaceman on 04 Aug, 2022, 08:14
Here's the image re-scaled so people can see what's going on. As said, I would have thought the rim should have a screw for the retaining clamp in the top of the rim but I can't see one here - not sure what the pin looking object is where the screw should be?

The pin looking object is just a reflection of something on the ceiling.
Title: Re: Headlight rim removal.
Post by: Mick Boon on 04 Aug, 2022, 13:22
Quote from: DAVE BRADY on 04 Aug, 2022, 09:11
Hi,

A bit obvious but have you tried rotating the headlight down a bit as the screw could well be obscured by the cowl?

Dave.

Perfect  :o    Thanks Dave !