Hi Guys
Looking for a decent gear lever shift quadrant for my 1971 A65 Part number 71-4116
These are different to the earlier quadrants so I have been told
The splines for the gear lever have been butchered
DBD32
presumably you dont want to pay a lot, otherwise, Draganfly do an exchange with your old part.
they have done a couple of spline replacements for me on BSA and Triumph and both been good jobs.
https://draganfly.co.uk/shop/76144/repair-kit/#68-3294A
:) :) :)
Replacement shafts are readily available and well within most local engineer's scope. I've done several and they are to my knowledge still in operation. However the DIY option is not a lot less expensive than Drags and a lot more mucking about. There's probably only a tenner in it.
Mike 8) 8) 8) 8)
Back in the fifties, following an involuntary dismount, I employed a pair of mole grips to facilitate changing gear - still on the bike and in use two years later when I sold the bike (C11G)!