Print Page - 1946 B31 oil feed pipe in timing cover

Title: 1946 B31 oil feed pipe in timing cover
Post by: Gadorey on 17 Feb, 2022, 11:04

Hello everyone,

I need to replace the oil feed pipe (part nr 66-698) on the inside of the timing cover as the small pipe is broken off.

What is the best way to remove it?

Thanks again for the help.

Cheers
Gui

Title: Re: 1946 B31 oil feed pipe in timing cover
Post by: martinh10 on 17 Feb, 2022, 12:30

I would try tapping a thread in the bore and draw it out with a short piece of tube (I/D a bit bigger than oil pipe O/D), a bolt with sufficient thread length and a crossbar or washer and nut. A bit of heat may help.

BSA Owners' Club Workshop Discussions

The BSA Workshop => Singles => Topic started by: Gadorey on 17 Feb, 2022, 11:04