:) :) :)
Are the later OIF type front fork yokes compatible with the eary frame. ie is a straight one for one swap possible.
Mike 8) 8) 8)
Short answer is no, unless you change the headstock bearings as well.
i have seen later TLS front end on A10, i think SRM can supply the correct Taper roller bearings.
;)
:) :) :) :)
Hi.
I was about to ask the Q of you. So thanks for that. Do you perchance hav a front wheel for this type of forks. Condition not that important but good condition would be best.
Mike 8) 8) 8) 8)