Can anyone help with the order of reassembly. All the bits came out with a bit of a rush into the draining tray.
It's mentioned in RR's book but not, sadly, with an exploded diagram.
I'm sure A goes on first (topmost) but there is a small rubber o ring (not shown) thats already on the outlet downtube
A is followed by the circlip B which sits in a groove and keeps A up.
Then there is the element C not shown.
After that it's probably F but who knows.
There does seem to be some sort of rubber seal on top of the hex head of the long bolt that holds it all together.
Well I contacted British Filters and they came up with the attatched diagram. Sadly they didnt have another diagram that identified the numbered parts.
Its a bit of help I guess.
You can just click on the attatched .pdf below.
I don't think the diagram helps. If I could get at my B25, I would offer to take the filter apart to remind me how it all goes back together. However, I believe the filter is similar to the Vokes filter shown in the attached as far as sealing the lower part of the assembly (items D-H). I would then assume washer A fits on to the filter perforated inlet tube retained by circlip B
https://www.youtube.com/watch?v=f6vzKBQIy7c
Here's the parts diagram showing 2 x O-rings (#39 & #42) which may or not help :o
Thanks for the replies Spaceman. The Volks one from the video looks a bit different to the BF one.