Print Page - oil feed/return pipe union

Title: oil feed/return pipe union
Post by: BOB M on 13 Jul, 2017, 21:12

Hi

I have an oil leak on the oil pipes union under the engine on my BSA A65 1963 (Looks like it needs a new gasket) Its held on with one bolt and my question is will this union come off without having to lift the engine up.

Bob

Title: Re: oil feed/return pipe union
Post by: Bess on 13 Jul, 2017, 21:44

Hi Bob M,
The oil pipe manifold has 2 x 'O' rings and can be replaced with the engine in place.

I fit part number 68-0588 (O Ring, Oil manifold) 6mm x 10mm or 1/4" x 3/8" BS010

Best wishes...

Title: Re: oil feed/return pipe union
Post by: BOB M on 13 Jul, 2017, 22:40

Thanks for the quick response Bess, x2 0 rings ordered. Glad the engine don't need moving :).

Thanks
Bob

Title: Re: oil feed/return pipe union
Post by: Bess on 14 Jul, 2017, 08:49

Hi BOB M,
Please to be of help, although its not the easiest of tasks........

Title: Re: oil feed/return pipe union
Post by: ChrisG on 14 Jul, 2017, 13:02

FYi on the Oil in frame A65, the considerate chaps at Slumberglade decided to position the frame down tubes and under rail directly beneath the bolt for the oil pipe connection manifold so you have to lift the engine.
Same with the primary side and the proximity of the primary chain adjuster to the under rail. There isn't enough room to get a sealing washer above the lock nut and the end cap (to stop oil dripping past the threads) needs to be modified so you can get a spanner on it. You need to assemble it all with the primary chain case off. All very frustrating.
Chris

BSA Owners' Club Workshop Discussions

The BSA Workshop => Twins => Topic started by: BOB M on 13 Jul, 2017, 21:12