Morning all....
just rebuilding my B40 lump and can't find any info on torque settings for the 3 bolts and 4 nuts on the crankcase housing.....dont want to nip it up willynilly....any info greatly appreciated! :D
Pete
Hi,
I don't think any were published.
The A50/A65 give 16/18 lb/ft for 5/16" dia crankcase studs/bolts, I would use that figure in the absence of anything else.
Best wishes..
Cheers Bess....I'll start at 10 and work up slowly....
regards,
Pete