Author Topic: 1953 b33 threaded steering bearing cups (Read 720 times)

luap · « **on:** 09 August, 2020, 08:50:54 »

is this strange i seem to have a threaded tube between my bearing cups im trying to remove them i have a set of normal cups any ideas thanks paul

JulianS · « **Reply #1 on:** 09 August, 2020, 10:02:33 »

Sounds a bit odd but would help if you posted some photos.

Pete C · « **Reply #2 on:** 09 August, 2020, 10:05:10 »

the bearing cups themselves are threaded to aid removal with the special tool. You are not confusing this with a tube are you?

luap · « **Reply #3 on:** 09 August, 2020, 18:44:14 »

the bearing cups themselves are threaded to aid removal with the special tool. You are not confusing this with a tube are you?

i think you are rite do you know where i can get the tool or a bolt with this thread

luap · « **Reply #4 on:** 09 August, 2020, 19:04:53 »

Pete C · « **Reply #5 on:** 09 August, 2020, 20:40:11 »

I think I got mine from C&D. It was a while back though.

Pete C · « **Reply #6 on:** 09 August, 2020, 20:48:38 »

1.5 inch diameter and 24 TPI. You screw it in and belt it with a drift through the steering head.

Pete C · « **Reply #7 on:** 09 August, 2020, 20:57:02 »