Author Topic: Mounting of Speedo and Tach for A10  (Read 356 times)

0 Members and 1 Guest are viewing this topic.

MJM_58SR

  • Silver Star
  • ****
  • Posts: 269
    • View Profile
Mounting of Speedo and Tach for A10
« on: 04 June, 2020, 10:18:23 »
Morning all
Would anyone be able to post a photo or give me details of the mounting of the speedo and tach on a super rocket please
I see the parts books show 8 rubber bushes but Iím not sure where they fit as itís not that clear from the parts books.
Any help appreciated
Thanks

Bess

  • Golden Flash
  • *****
  • Posts: 1504
    • View Profile
Re: Mounting of Speedo and Tach for A10
« Reply #1 on: 04 June, 2020, 10:49:10 »
Hi,
     Hope  this helps:

MJM_58SR

  • Silver Star
  • ****
  • Posts: 269
    • View Profile
Re: Mounting of Speedo and Tach for A10
« Reply #2 on: 04 June, 2020, 10:59:27 »
Thanks Bess
It certainly does, didnít want to damage my newly restored bits!
Regards
Martyn

MJM_58SR

  • Silver Star
  • ****
  • Posts: 269
    • View Profile
Re: Mounting of Speedo and Tach for A10
« Reply #3 on: 13 June, 2020, 16:28:05 »
Hi Bess
Can you let me have the measurements for the rubber bushes please, Iíve got some bit they look a bit on the large side!
Martyn

Bess

  • Golden Flash
  • *****
  • Posts: 1504
    • View Profile
Re: Mounting of Speedo and Tach for A10
« Reply #4 on: 13 June, 2020, 17:54:04 »
Hi Martyn,
                If you have part number 15-7383, they are 7/16" x 3/16" x 1/4".

I am aware some suppliers are offering a set of 4 and you need to cut them in half, obviously you can get some rubber hose with similar dimensions and cut your own. Hope this helps.

Regards...Bess

MJM_58SR

  • Silver Star
  • ****
  • Posts: 269
    • View Profile
Re: Mounting of Speedo and Tach for A10
« Reply #5 on: 13 June, 2020, 19:43:23 »
Thanks Bess
The ones Iíve got are an inch deep. 15/16 across
Obviously Iíve been turned over!
Ah well not to worry, learning curve...getting a bit fed up with idiots advertising stuff they donít actually know about.
Anyway ive got the measurement now so I can get sorted!
Thanks
Martyn