Author Topic: battery conditoner on pos earth  (Read 1627 times)

0 Members and 1 Guest are viewing this topic.

SteveT2

  • Guest
battery conditoner on pos earth
« on: 28 April, 2017, 13:15:44 »
I am thinking of putting a battery conditioner on my A65, with it been a pos earth set-up, do I connect it up as norm? I.e. It's a ctek charger, so will that be pos to pos and - to - as you would on a normal - system? Just wanted to be sure 🤔

TTJOHN

  • Golden Flash
  • *****
  • Posts: 544
    • View Profile
Re: battery conditoner on pos earth
« Reply #1 on: 28 April, 2017, 20:09:28 »
I replaced all my Ktecs with  DVR2 from Dynamo regulars, I found that Ktec does not charge the battery if it's flat whereas DVR2 control box does.

TTJohn

ChrisG

  • Golden Flash
  • *****
  • Posts: 797
    • View Profile
Re: battery conditoner on pos earth
« Reply #2 on: 06 May, 2017, 18:28:10 »
Ctek chargers are really good and they keep the battery topped up nicely. Just use them as you would any charger. i.e + to + and -ve to -ve. If you get them the wrong way round, the charger will error and shut down so wont melt the battery.
Hope this helps
Chris