Author Topic: QD Hub  (Read 102 times)

0 Members and 1 Guest are viewing this topic.

BANHAM

  • Star
  • *
  • Posts: 11
    • View Profile
QD Hub
« on: 10 January, 2019, 13:00:50 »
Has anybody experienced problems with the mating of QD hubs. I have QD hub on my B44SS which was extremely difficult to part and now after a good clean of the splines I can only get about half engagement. Any idea's guys

Bees

  • Star
  • *
  • Posts: 21
    • View Profile
Re: QD Hub
« Reply #1 on: 10 January, 2019, 20:54:18 »
Can you get it together without the spindle in?

Had a problem with mine. Turned out it was a bent spindle.( the longer one)

A10 JWO

  • Golden Flash
  • *****
  • Posts: 523
    • View Profile
Re: QD Hub
« Reply #2 on: 12 January, 2019, 17:34:42 »
Give the surfaces a good clean with gunk and put some copper grease on it.

BANHAM

  • Star
  • *
  • Posts: 11
    • View Profile
Re: QD Hub
« Reply #3 on: 13 January, 2019, 09:07:01 »
Makes no difference with or without the spindle. Not sure if it's the male spline or the female spline that needs attention.

Bees

  • Star
  • *
  • Posts: 21
    • View Profile
Re: QD Hub
« Reply #4 on: 13 January, 2019, 10:18:17 »
I know not much help but it has to be a problem with the splines. I suppose the tiniest burr will jamb it.

A bit random. But did BSA make more than type of QD hub and you've got a mismatched pair that someone has forced together in the past?

You never know what may have happened over the years

BANHAM

  • Star
  • *
  • Posts: 11
    • View Profile
Re: QD Hub
« Reply #5 on: 13 January, 2019, 19:37:40 »
That's a good point, is there any body out there that might know?