Author Topic: D7 Restoration  (Read 2034 times)

0 Members and 1 Guest are viewing this topic.

A10 JWO

  • Golden Flash
  • *****
  • Posts: 909
    • View Profile
D7 Restoration
« on: 01 April, 2018, 15:10:16 »
I have been offered a D7 in running order for £750. Not bad. It will need restoring but I am worried about the cost. I have spent a fortune on a 650 I have nearly finished. I will get some money back if I sold it. However if I were to fit new rims, tyres and a respray the Bantam will it be worth the effort. I only buy these bikes to rescue them but don't want to bang my head on a brick wall. You lads must have some good advice on the section, thanks.

AWJDThumper

  • Empire Star
  • *****
  • Posts: 881
  • Dandy Beagle D14 C15 B40 B40WD B44 B25 B50 A10 A65
    • View Profile
Re: D7 Restoration
« Reply #1 on: 02 April, 2018, 08:19:21 »
I have just started the restoration of a D14 and know exactly what it will cost to finish the project - this will basically be more or less the same as that of any of the other single cylinder BSA's I've restored. Since the D14 will be a full restoration, it will almost certainly cost me more to restore in this way than it will be worth when finished if you also take into account the initial purchase price. However, I need to add a Bantam to my collection of BSA's and so I'm happy to bear the cost.

A10 JWO

  • Golden Flash
  • *****
  • Posts: 909
    • View Profile
Re: D7 Restoration
« Reply #2 on: 04 April, 2018, 14:43:10 »
Hi Thumper, will test ride the D7 tomorrow if its not peeing down. Found a lock up at my mates mums where my wife can't see it till 2019.  ::)

AWJDThumper

  • Empire Star
  • *****
  • Posts: 881
  • Dandy Beagle D14 C15 B40 B40WD B44 B25 B50 A10 A65
    • View Profile
Re: D7 Restoration
« Reply #3 on: 04 April, 2018, 15:43:28 »
Fortunately, my wife gave up trying to stop me buying motor bikes a long time ago providing I don't encroach on her garden. :)

A10 JWO

  • Golden Flash
  • *****
  • Posts: 909
    • View Profile
Re: D7 Restoration
« Reply #4 on: 04 April, 2018, 15:49:29 »
Do the little later four speed engines interchange with these smaller models ? Thanks. I seem to remember some of those were highly tuned years ago.

JulianS

  • Empire Star
  • *****
  • Posts: 2637
  • A10
    • View Profile
Re: D7 Restoration
« Reply #5 on: 04 April, 2018, 16:10:19 »
Yes you can replace a 3 speed engine with a 4 speed engine.

Wiring different between flywheel magneto models and D10 and later models.

The best engines were the last, the B175 units. The D14/4 did have a weakness in the rivitted on crankshaft compression plates with could let go and wreck your engine. The factory recommend replace them with latest type.
« Last Edit: 04 April, 2018, 16:12:26 by JulianS »

A10 JWO

  • Golden Flash
  • *****
  • Posts: 909
    • View Profile
Re: D7 Restoration
« Reply #6 on: 04 April, 2018, 17:34:11 »
Thanks Julian.

A10 JWO

  • Golden Flash
  • *****
  • Posts: 909
    • View Profile
Re: D7 Restoration
« Reply #7 on: 05 April, 2018, 16:31:32 »
The Bantam has joined my family, more questions at a later date. thanks.

AWJDThumper

  • Empire Star
  • *****
  • Posts: 881
  • Dandy Beagle D14 C15 B40 B40WD B44 B25 B50 A10 A65
    • View Profile
Re: D7 Restoration
« Reply #8 on: 07 April, 2018, 11:07:29 »
Hope you enjoy restoring your Bantam. Having fun restoring my D14 engine at the moment - I was brought up working on these two strokes but am having to re-learn the art. The main thing I notice is how fragile the die cast engine casings are compared with the normal sand cast 4-strokes ones found in other BSA's.

A10 JWO

  • Golden Flash
  • *****
  • Posts: 909
    • View Profile
Re: D7 Restoration
« Reply #9 on: 08 April, 2018, 17:19:50 »
I too will have to re-learn the 2 stroke art. I used to tune Lambrettas to 21 BHP years ago, 30 mm carb and expansion boxes. Still have an SX 200 in the back of the garage. Wish I was young again.  ???