Author Topic: B33 Primary Chaincase Gasket  (Read 162 times)

0 Members and 1 Guest are viewing this topic.

Mark B

  • Star
  • *
  • Posts: 30
    • View Profile
B33 Primary Chaincase Gasket
« on: 26 March, 2018, 11:15:11 »
When I removed the steel primary chaincase it looked as though some previous owner had fixed the cork gasket in place with copious amounts of Araldite.  I've got a new cork gasket and the two cork rings for the spacer behind the footpeg.  Will these be oiltight when I put the cover back on or should I use a sealant too?

Thanks for any advice.

ducati2242

  • Blue Star
  • **
  • Posts: 79
  • DB 34 GS
    • View Profile
Re: B33 Primary Chaincase Gasket
« Reply #1 on: 26 March, 2018, 20:34:31 »
loctite 518 is what i use . can be bought on ebay . there is probably an equivalent but this doesn't go hard just stays sticky .

Mark B

  • Star
  • *
  • Posts: 30
    • View Profile
Re: B33 Primary Chaincase Gasket
« Reply #2 on: 27 March, 2018, 08:49:33 »
Thanks. In fact the new gasket is the wrong one, so I've got a few days to find some Loctite.