Author Topic: C15 Restoration  (Read 838 times)

0 Members and 1 Guest are viewing this topic.


  • Blue Star
  • **
  • Posts: 76
    • View Profile
C15 Restoration
« on: 26 February, 2017, 07:17:46 »
I managed to get the rear guard fixing pins sorted thanks.
What a job as you said to drill out the frame lugs had to buy a right-angled attachment and cut off
Drill bit to get access.
By the way existing thread was 5/16 BSC.
Just to mention the progress of the rebuild almost all parts are ready to refit.
I am starting to worry "Will it all work" and what to do next.


  • Empire Star
  • *****
  • Posts: 767
  • Dandy Beagle D14 C15 B40 B40WD B44 B25 B50 A10 A65
    • View Profile
Re: C15 Restoration
« Reply #1 on: 26 February, 2017, 09:18:49 »
Yes - it is normal. The other thing associated with rebuilding bikes is to be prepared to do a bit of fettling once completed. In my experience, you're bound to find a few issues which may need a bit of re-work, especially on the engine. Best approach is to be prepared for this and take it in your stride!