Author Topic: BSA BD34 GS  (Read 186 times)

0 Members and 1 Guest are viewing this topic.

ducati2242

  • Blue Star
  • **
  • Posts: 52
  • DB 34 GS
    • View Profile
BSA BD34 GS
« on: 14 January, 2018, 18:40:06 »
I have just , saturday , bought a bsa gold star . The engine is in many pieces and need quite a lot of sorting . Not sure about the crankshaft ,may buy new one , but it is missing the piston . The bore looks good but is worn / bored / honed to 86.44 . Looks honed but may have been worn then honed . The liner measures in english 3.4035 at the top and 3.4055 at the bottom a rebore would only be 3.4065 that would give me 0003 thou clearance . I believe a +60 is 86.52 . Standard bore is 85mm and 60 though is 1.52mm so it should , In my mind , be doable  . What do you think .

ducati2242

  • Blue Star
  • **
  • Posts: 52
  • DB 34 GS
    • View Profile
Re: BSA BD34 GS
« Reply #1 on: 15 January, 2018, 17:46:29 »
Changed my mind bought a pearson crank , bearings , camshafts , liner and standard piston . Looking forward to this .