Author Topic: Con rod & Big/Little end assy wanted  (Read 200 times)

0 Members and 2 Guests are viewing this topic.

PaulG

  • Star
  • *
  • Posts: 6
    • View Profile
Con rod & Big/Little end assy wanted
« on: 21 November, 2021, 05:51:58 »
Hi All,

Where could I buy a new con rod assembly for my '53 D1 ?

The gudgeon pin I have in my new piston (re-bore) is 12mm. The old one in the damaged piston was also 12mm.
Apparently some early D1's had a smaller gudgeon pin.

The big end pin that I pressed out of the flywheel is 19mm (or 3/4")

See photo.

Thanks in anticipation,
Paul G

AdrianS

  • Golden Flash
  • *****
  • Posts: 684
    • View Profile
Re: Con rod & Big/Little end assy wanted
« Reply #1 on: 21 November, 2021, 22:35:18 »
Have you tried Rex Caunt ?

bluebell

  • Star
  • *
  • Posts: 15
    • View Profile
Re: Con rod & Big/Little end assy wanted
« Reply #2 on: 27 November, 2021, 04:24:37 »
do you have an adjustable reamer? is your big end good  as i may have a new small end in my bits  chris  07901735443   swansea