Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Bess

Pages: 1 ... 15 16 [17] 18 19 ... 25
242
Twins / Re: torquing down early a65 head
« on: 14 May, 2017, 20:41:58 »
 :) :) :)

243
Twins / Re: torquing down early a65 head
« on: 14 May, 2017, 18:52:29 »
Hi,
    Hope this helps....

244
Have you seen this ?


245
The Star and Garter / Re: anti wet sumping valve
« on: 10 May, 2017, 20:24:46 »
 :) :) :)

246
Singles / Re: B31 Valve Seat Grinding
« on: 10 May, 2017, 10:37:08 »
Hi,
    Here's an extract from BSA A65 manual, generally the same for all...

Best wishes...

247
Twins / Re: rear full width hub
« on: 08 May, 2017, 10:12:08 »
Hi Paulm,
                Could it be something pinching on the inner and outer races such as the abutment ring?

Best wishes...


248
Twins / Re: Smoking
« on: 08 May, 2017, 09:56:04 »
Hi Fereday,
                  What oil are you using?

Regards.....

249
The Star and Garter / Re: Chrome
« on: 08 May, 2017, 09:52:08 »
Hi All,
         Can anyone recommend a chroming works in the Devon area?

Thanks...

250
Singles / Re: 69' Starfire O ring for inner right hand cover.
« on: 07 May, 2017, 16:43:25 »
 :) :) :)

251
Twins / Re: A65 Engine rebuild
« on: 06 May, 2017, 10:24:37 »
Hi Ken,
            I find my rebuilds are finance driven. What I did wasn't whats listed below but if I re mortgaged my house, then:

What you've done +

Change all the bushes
New rocker spindles
Alloy valve guides
High lift cam, new cam followers
New head bolts
Big bore kit
New oil PRV
High strengh push rods
Sump filter kit
New gearbox bearings
Replace worn gearbox parts
New final drive sprocket
Clutch plate conversion and belt drive
   
Best wishes...

252
Twins / Re: No clutch
« on: 03 May, 2017, 21:18:04 »
 :) :) :)

253
Twins / Re: Aftermarket oil filter
« on: 03 May, 2017, 09:46:13 »
Hi,
    Further to the discussion regarding hose clips, maybe this type?

http://amalcarb.co.uk/fuel-hose-clip-15-17mm.html

Best wishes...

254
Twins / Re: Oil Pressure Switch Leak A65L 1970
« on: 02 May, 2017, 16:18:02 »
Hi Hugh,
              Okay, sounds like the thread tape should suffice.

However I have had instances where thread core/root has a tiny crack due to it being inadvertently knocked, it maybe worth further investigation.

Best wishes...

255
Twins / Re: Oil Pressure Switch Leak A65L 1970
« on: 02 May, 2017, 14:17:30 »
Hi Hugh,
              I am not entirely sure where its leaking from the description. If its leaking via the threads, I would remove the switch, clean the threads, using PTFE thread tape, wrap anti clockwise a few times ensuring the switch bore is not obstructed and replace switch.

Best wishes...

Pages: 1 ... 15 16 [17] 18 19 ... 25