Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Mark

Pages: [1] 2
1
Singles / Re: C15 speedo drive
« on: 25 May, 2018, 20:01:17 »
Thanks for the info Adrian, I will look into it & save the mess of filling the syringe.
Mark

2
Singles / C15 speedo drive
« on: 23 May, 2018, 20:43:11 »
I wanted to clean & re-grease the speedo drive on my C15 prior to fitting the rear wheel so I cleaned all the old grease of & soaked it in jizer for a few days blew it out with the airline & then let it dry for a few days,after which I wanted to put new grease in there but no grease gun I have would fit the grease nipple.

I took out the grease nipple & used a syringe which I could screw into the thread of the grease nipple hole & kept rotating the speedo drive the grease went in easily.

I hope this help others!

Mark

3
Singles / Re: C15 Front hub spindle
« on: 23 May, 2018, 20:23:59 »
Hi AWJDThumper & all,

A Quick update, wheels now relaced using my original measurements of as described before (from the brake hub side) from the opposite side to the brake hub on both wheels the offsets dimensions are.

Front: 19mm

Rear: 26mm

see photos

I hope this helps!

Mark


4
Singles / Re: C15 Front hub spindle
« on: 05 May, 2018, 21:03:46 »
Thanks for the info AWJDThumper,

Hubs sprayed today then need to be lacquered I will be away working from Tuesday for a while as soon as I am back I will be rebuilding & will let you know.

Best Regards Mark   

5
Singles / C15 rear mudguard fixings
« on: 05 May, 2018, 20:45:35 »
Hello all,

I bought this 1965 C15 in boxes & I have just fitted the rear mudguard to the fixing points 3 bolts as shown in the diagrams & photos, it seems really flimsy on the back end of the mudguard side to side movement.

I have also found a bracket that a previous owner may have fitted to resolve this issue also shown in the photos.

Question is how many fixing points should there be?

Thanks Regards Mark

6
Singles / Re: C15 Front hub spindle
« on: 02 May, 2018, 21:24:56 »
Thanks for the information Julian very helpful.

I measured the offset before I stripped the rims from the hubs as followed both front & rear from hub without front brake plate & rear sprocket fitted as follows measurements taken from these sides.

Front 4.5mm & I would need to correct this by the thickness of the shims I found in the front hub.

Rear 4.0mm with sprocket removed.

I just wondered if this is correct & if any member has a record of the correct offset?

Thanks Regards Mark

7
Singles / C15 Front hub spindle
« on: 01 May, 2018, 21:04:32 »
Hello to all,

New front & rear rims & spokes ordered for my 1965 C15 hubs are to be blasted & painted first.
Upon strip down of the front hub I noticed some washers/shims on the spindle is this normal & should they be there?
Photos attached.
Thanks in advance for your help.
Regards Mark :)

8
The Star and Garter / Re: New ebay scam.
« on: 18 January, 2018, 19:58:19 »
Hi A10,

A link to the ebay page would be good please.

Regards Mark

9
The Star and Garter / Re: 60th Anniversary Calendar
« on: 17 January, 2018, 19:51:19 »
Thank you its really nice & a surprise to!

Mark

10
Twins / Re: Lucas 169SA Handlebar Light Switches
« on: 13 November, 2017, 19:02:44 »
Hello

A really good supplier for heat shrink & lots of other items, I am lucky that they are near me but they are really good & very helpful!

http://www.vehicle-wiring-products.eu/

I hope this helps,
.
Regards Mark

11
The Star and Garter / Such a shame
« on: 20 August, 2017, 18:45:44 »
What is the world coming to I can remember seeing these as a kid & loved it!

Regards Mark.

http://www.dailymail.co.uk/news/article-4805430/White-Helmets-ride-time-month.html

12
Singles / Re: C15 ss Max speed
« on: 25 July, 2017, 19:24:25 »
I really can't understand what you are trying to achieve these bikes are made to enjoy & not to thrash the arse off them & probably destroy them.

SIMPLE SOLUTION IF YOU WANT MORE SPEED BUY A BIGGER BIKE! ???

Regards Mark.


13
The Star and Garter / Re: Just got back.....
« on: 25 June, 2017, 16:48:46 »
Hi Dean,

I would loved to have been there but unfortunately working away in Holland :(

What pub did you stay at & what route did you ride it would just be nice to know as i am from Ripley in Derbyshire & did anyone get any photos?

Cheers Mark

14
The Star and Garter / Re: Derusting a petrol tank
« on: 07 June, 2017, 10:49:51 »
Hi Mike,

To resize a photo I normally right click on the photo then scroll down to open with then select paint, when paint opens in the top left corner select resize then change the 100%to say 25% then rename & save your file to a new folder or folder of your choice you should then be able to post the pictures.

Works for me.

Regards Mark

15
The Star and Garter / Re: C15 chain guard
« on: 07 June, 2017, 10:42:09 »
Hi Tim,

Please could you PM me the pictures as I have one to fit in the future & i am not sure if the chaingaurd in the boxes of bits is correct.

Thanks Mark :)

Pages: [1] 2