Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - CLIVEDACKUS

Pages: [1]
2
The Star and Garter / Re: Historic Class Change - DVLA Website
« on: 09 June, 2018, 11:38:33 »
So do I understand this correctly? What we are saying here is that if a bike is already tax exempt it automatically becomes MOT exempt WITHOUT the need to fill in a V112 form??

3
The Star and Garter / Re: A65 oil filter
« on: 02 June, 2018, 16:12:03 »
If unable to make Tonys bracket then surfing the net throws up a number of options. For eg Paul Goffs can supply a range including one to fit the A65.

http://www.norbsa02.freeuk.com/goffyoil.htm

5
Singles / Re: B25SS Tacho Drive
« on: 13 May, 2018, 22:51:51 »
Thanks for that

6
Singles / B25SS Tacho Drive
« on: 08 May, 2018, 18:57:47 »
When fitting/removing a tacho drive the manual says you need to raise the engine at the front. My question is. How much dismantling do I need to do to enable me to lift the front of the engine up enough to allow the drive to slide out without hitting the frame?

Thanks in advance
Clive

7
Singles / 60MM Chrome clock bracket
« on: 07 May, 2018, 20:37:07 »
Those of you with late model 250's might be interested in these brackets. They have been very hard to find in recent years but now seem to be available again. Have just purchased one myself.


https://www.britishbikebits.com/chrome-clock-bracket-60mm-bsa-b25-b50

9
Singles / Re: Starfire Primary Chain Case Drain plug / Level Plug
« on: 07 November, 2017, 16:05:59 »
Could be a repair of some sort. Looks like its got plenty of araldite  around it?

10
Singles / Re: B25 starting problem
« on: 11 September, 2017, 20:28:36 »
Weak battery, dirty carb, blocked breather in fuel cap.

11
Singles / Sealing Primary Cover
« on: 02 September, 2017, 16:28:23 »
Hi guys

Whats the general recommendation for sealing the primary cover/crankcase joint on a B25 please?

Clive

12
Singles / B25SS CLUTCH SPRING NUT 57-2748
« on: 21 June, 2017, 18:09:41 »
Hi all

i have just bought two sets of clutch spring nuts for my B25 - one set from TMS which do not fit and another from Feked which also do not fit. Both sets have a smaller head than those on the bike and neither have lock wire holes.

Does anyone know the thread size for these nuts please?

Cheers

Clive

13
Singles / B25SS CLUTCH CENTRE
« on: 29 March, 2017, 21:13:17 »
Hello

Does anyone know a source of assembled clutch centres for 1972 250's please?

Clive

14
The Star and Garter / Re: "The Star' July 2015
« on: 25 March, 2017, 19:30:47 »
You can access back issues of the Star on the clubs website by logging on as a member.

Pages: [1]