Hi, want to fit an electronic tachometer to my 1970 starfire but haven't come across any online, would anypersons know of a source?!,   TIA

Hi have bought a new stainless rear mudguard which came with no fixing holes, any tips for fitting?

Hi, just fitted an battery/oil pressure minder but after refitting the wiring back to the ignition switch the engine will not turn off, lights turn off with key
Where did I go wrong?!

Trying to find the gasket that goes between mudguard and rear light but with no luck, cannot see one in the parts nook either!!

Cannot get a spanner around the pressure switch,
Thinking of using a chain wrench! Thoughts anyone
TIA

Just come back from a ten mile run
on my 70 starfire and as soon as I got to a standstill on my drive the engine died I can restart but will only keep running if I hold the throttle slightly was a bit of spitting when i did this! any advisories? TIA

Hi, want to fit an oil pressure switch on my 70 starfire,  would the 60-3719 be the correct switch?!, TIA

Hi all, i have a slight weep of oil at the front end of the Rocker box , can i take off the cover without removing the barrel? TIA

Hi, I have the original complete rear light unit to fit
But I don't know what fits into the hole on top of alloy holder!, there are the two holes for bolts on the bottom of the bracket.

Hi, bike starts fine but cuts out as soon as I turn on the lights,
When running only the brake light works and gets brighter the more revs I give it
I suspect the battery is on its last legs as well, the lights do come on without the bike running
But very dimly!?

Hi All, just acquired a 1970 starfire the chain has about 1.5in to 2in of travel!, What is the correct measurements,     TIA - kev

Hi, Have just acquired a bsa starfire, I would like to add indicators
But do not know how to go about it! any advise would be gratefull
                                              TIA