Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - Plammiman

Pages: [1]
1
Twins / A10 pedal
« on: 17 May, 2020, 19:58:29 »
Hi All
I want to straighten out my brake pedal to drop the foot pad down a bit as itís to high with my foot on the foot rest. Can anyone advise the best method and what material the pedal is made of. I donít want to break it as they are rare to find.
Thanks.
Phil

2
Which BSA do you ride? / A10 Spitfire Scrambler
« on: 04 April, 2020, 18:18:49 »
This is my 1962 A10 Scrambler replica which I have just completed a full nut and bolt restoration

3
Which BSA do you ride? / A10 fuel taps
« on: 03 April, 2020, 11:20:32 »
I am looking for some recommendations on the best way to operate my fuel taps on my A10. I have a non reserve tap in the near side position that is located in a well lower than the rest of the tank. The other tap on the off side is a reserve tap with a double push pull plunger, one has a twist and lock and one a straight push pull on this tap. First question is do I need a reserve tap? Are the taps in the right location? Should I run with both taps on? On the reserve tap any ideas which is the main and which is the reserve without striping it out to flow check it? Be interested in any views
Phil

4
Twins / A10 exhaust
« on: 28 March, 2020, 22:33:41 »
I have bluing of my exhausts. I am pretty happy with timing and carb settings. Does anyone know what the wall thickness is on a typical exhaust?

5
Twins / Spitfire replicat exhaust fitting
« on: 21 November, 2017, 22:50:07 »
Can anyone advise what the stand off welded to the high level pipes are for? Should they butt the frame when clamped with the mid point fixing to the original tool box lug

Pages: [1]