BSA Owners' Club Forum

The BSA Workshop => Bantam => Topic started by: PaulG on 21 November, 2021, 05:51:58

Title: Con rod & Big/Little end assy wanted
Post by: PaulG on 21 November, 2021, 05:51:58
Hi All,

Where could I buy a new con rod assembly for my '53 D1 ?

The gudgeon pin I have in my new piston (re-bore) is 12mm. The old one in the damaged piston was also 12mm.
Apparently some early D1's had a smaller gudgeon pin.

The big end pin that I pressed out of the flywheel is 19mm (or 3/4")

See photo.

Thanks in anticipation,
Paul G
Title: Re: Con rod & Big/Little end assy wanted
Post by: AdrianS on 21 November, 2021, 22:35:18
Have you tried Rex Caunt ?
Title: Re: Con rod & Big/Little end assy wanted
Post by: bluebell on 27 November, 2021, 04:24:37
do you have an adjustable reamer? is your big end good  as i may have a new small end in my bits  chris  07901735443   swansea