Author Topic: Cardurettor sealing  (Read 717 times)

0 Members and 1 Guest are viewing this topic.

TIGER

  • Star
  • *
  • Posts: 42
    • View Profile
Cardurettor sealing
« on: 12 May, 2017, 12:14:17 »
Hello people
                  Update on the C15
                  Solved the seat problem mainly due to help from Julian. (Thanks again)
                  Some fettling still to do.
Carb. Is leaking from float chamber cover dispite new gasket and Loctite cement.
Can anyone recommend a suitable cement ?
Regards
           Tim

JulianS

  • Empire Star
  • *****
  • Posts: 559
  • A10
    • View Profile
Re: Cardurettor sealing
« Reply #1 on: 12 May, 2017, 12:35:03 »
Float cover probably distorted by repeated removal and replacement over the years.

Only real cure is a new cover.

The joint surface on the body is very narrow, that also needs to be sound.

Editor

  • Blue Star
  • **
  • Posts: 56
    • View Profile
Re: Cardurettor sealing
« Reply #2 on: 12 May, 2017, 16:00:36 »
Julian is spot on. I had a C15 and exactly the same thing happened, when I looked at the joint face on the cover, the distortion is obvious. I have had many Monoblocs over the years and had never come across that before. Hitchcock's do a replacement, if you're quick they might be able to despatch today.
Chris

TIGER

  • Star
  • *
  • Posts: 42
    • View Profile
Re: Cardurettor sealing
« Reply #3 on: 12 May, 2017, 22:36:21 »
Many thanks.
Updates to follow.
Just got a date for DVLA inspection at the end of the month.
Fingers crossed.
Regards
           Tim

Mike Farmer

  • Royal Star
  • ***
  • Posts: 223
    • View Profile
Re: Cardurettor sealing
« Reply #4 on: 13 May, 2017, 09:13:09 »
 :)
You could try making a gasket out of "cushion floor". I've used it for several gasket applications. Its thicker to start with and will squeeze up easily.

Mike ;D

Thunderbolt

  • Star
  • *
  • Posts: 1
    • View Profile
Re: Cardurettor sealing
« Reply #5 on: 13 May, 2017, 12:17:03 »
I always use Hylomar but you must put a small amount spread on each surface and then most importantly leave the sealant to cure for at least 15 minuets before assembly. If you don`t leave the sealant long enough before assembly the petrol will just wash it away.
Good luck.
 

TIGER

  • Star
  • *
  • Posts: 42
    • View Profile
Re: Cardurettor sealing
« Reply #6 on: 28 May, 2017, 07:10:09 »
Many thanks for all the help again.
Just returned from holiday and the problem with carb cover seal.
Julian you are spot on cover is warped.
Is the 376 cover the same I am seeing these advertised.

DOES ANYONE KNOW HOW ARTHER IS ?
Regards
            Tim

JulianS

  • Empire Star
  • *****
  • Posts: 559
  • A10
    • View Profile
Re: Cardurettor sealing
« Reply #7 on: 29 May, 2017, 09:15:19 »
375 376 and 389 covers are the same.

TIGER

  • Star
  • *
  • Posts: 42
    • View Profile
Re: Cardurettor sealing
« Reply #8 on: 29 May, 2017, 12:18:05 »
Thanks again.
No word on Arther?
Tim