Diagram from A65 workshop manual. Are you looking for anything in particular?
Thanks for that Julian.
I wanted to see if I had lost a spacer washer that fitted round the spindle, between the brake plate and the bearing.
When I fitted the TLS to my A7ss I used the A7 spindle, When I tightened the nut up that holds the brake plate on, it locked the plate solid (would not turn in the drum)
I have made a spacer washer about 4mm thick.
Now the nut will tighten up tight and the brake plate will turn freely in the drum.
The spacer fits where the arrow is pointing.
Roy.