Author Topic: Super Rocket head torque  (Read 132 times)

0 Members and 1 Guest are viewing this topic.

BARNFIELD

  • Star
  • *
  • Posts: 6
    • View Profile
Super Rocket head torque
« on: 08 November, 2017, 18:47:45 »
Can anyone advise on the correct torque value for Super Rocket cylinder head bolts. Thanks, Greg

Bess

  • Silver Star
  • ****
  • Posts: 251
    • View Profile
Re: Super Rocket head torque
« Reply #1 on: 08 November, 2017, 20:22:41 »
Hi BARNFIELD,
                       Did you see your original post answers?

Best wishes...

BARNFIELD

  • Star
  • *
  • Posts: 6
    • View Profile
Re: Super Rocket head torque
« Reply #2 on: 08 November, 2017, 22:54:57 »
Checked to make sure was posted but couldn't see it, hence posting a second time. Can't find any answers tho'.


Bess

  • Silver Star
  • ****
  • Posts: 251
    • View Profile
Re: Super Rocket head torque
« Reply #4 on: 09 November, 2017, 09:45:06 »
Hi,
    I have attached the complete A65 torque settings.

There is a service sheet describing the thick washers Julian mentioned, I cant find it at the moment. The dimensions are 3/8" X 5/8" X .104", I purchased some washers with a O/D diameter  larger than 5/8" to get the thickness and turned them down. If you not got a lathe, put 5 on a fully threaded bolt, lock them with a nut and grind them down to size.

Best wishes...