Author Topic: boyer bransden ignition  (Read 177 times)

0 Members and 1 Guest are viewing this topic.

royblackburn1@btinternet.

  • Star
  • *
  • Posts: 20
    • View Profile
boyer bransden ignition
« on: 25 September, 2017, 10:33:23 »
Hi how can I check my boyer bransden ignition is working ok in situ had to lift engine to change oil feed o rings so removed coils to get at engine mounting  bolts now engine running rough,thanks Roy

DAVE BRADY

  • Star
  • *
  • Posts: 3
    • View Profile
Re: boyer bransden ignition
« Reply #1 on: 25 September, 2017, 10:45:03 »
Roy,

I can remember having a similar problem and it turned out to be a dodgy wire.  It must have been just about working but once disturbed caused problems. Unless you have already done so, check all the connections for cleanliness and perhaps use some wire to bypass the wires in situ to eliminate them.
Good luck.

Dave Brady

Bess

  • Silver Star
  • ****
  • Posts: 251
    • View Profile
Re: boyer bransden ignition
« Reply #2 on: 25 September, 2017, 11:11:04 »
Hi Roy,
            Try here:

http://www.boyerbransden.com/faultfinding.html

Best wishes...

royblackburn1@btinternet.

  • Star
  • *
  • Posts: 20
    • View Profile
Re: boyer bransden ignition
« Reply #3 on: 25 September, 2017, 19:09:39 »
Thanks guys loose wire connection was the trouble but not obvious, Roy