Author Topic: A65L Gearbox  (Read 248 times)

0 Members and 1 Guest are viewing this topic.

DAVID.FORSYTH@VIRGIN.NET

  • Star
  • *
  • Posts: 22
    • View Profile
A65L Gearbox
« on: 01 September, 2017, 14:26:37 »
I've just rebuilt an A65L engine and gearbox. The engine is running great but I have a problem change up to 3rd and 4th gear from 2nd gear.  The return spring doesn't return the gear change lever to the correct position to allow the gear change plunger to engage into the window on the cam plate. If you move the lever down ever so slightly from the returned position then shift up, it does. I have fitted a new return spring but this didn't rectify the problem. Any tips on how to fix this?

Regards
Dave

Bess

  • Silver Star
  • ****
  • Posts: 255
    • View Profile
Re: A65L Gearbox
« Reply #1 on: 01 September, 2017, 19:17:07 »
Hi,
    Depends on year of your bike, 1971 has a adjustment. See attachment....

Best wishes...

DAVID.FORSYTH@VIRGIN.NET

  • Star
  • *
  • Posts: 22
    • View Profile
Re: A65L Gearbox
« Reply #2 on: 02 September, 2017, 22:38:27 »
Hi Bess, it's a 1969 bike so no adjuster. I had a Good  look at it today. I managed to bend the new spring a little and that did the trick.

Regards
Dave

Bess

  • Silver Star
  • ****
  • Posts: 255
    • View Profile
Re: A65L Gearbox
« Reply #3 on: 03 September, 2017, 11:04:02 »
Hi,
     Good news.

Usual issues are - When fitting the springs the spring prongs should cross over. There are 2 different return springs your year is the 68-3125, earlier models is the 68-3084 - may make a difference, as would cheap reproductions.

Best wishes...

DAVID.FORSYTH@VIRGIN.NET

  • Star
  • *
  • Posts: 22
    • View Profile
Re: A65L Gearbox
« Reply #4 on: 04 September, 2017, 21:31:39 »
Hi Bess, thank you.

Regards
Dave