Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - andy1953

Pages: [1]
1
The Star and Garter / B31 plunger clutch centre
« on: 08 October, 2019, 15:43:10 »
Hi hope someone can help I have a 1953 plunger model and I am trying to find the correct part for the clutch centre I already have bought the part that is in the parts manual 65-3873 but this doesn't fit the main shaft it seems to hold off and will not allow the chain wheel align with the crankshaft sprocket also the rear of the part is different to my part do I have the right one or is there another part number I should look for

2
Singles / Re: B31 stand
« on: 30 August, 2017, 07:27:25 »
Hi
I have fitted  a prop stand from a royal enfield on mine this mounts to the front engine plates all I had to do was get longer bolts and make up some spacers so that the stand would clear the primary case this work well and the bike stands nicely
Andy1953

3
Singles / Re: 1951 BSA B33 Barrel/cylinder
« on: 30 August, 2017, 07:18:55 »
Hi try dragonfly the BSA people they might be able to help they had some stuff on eBay a couple of weeks ago
Andy1953 :)

4
Singles / Re: b33 oil pumps
« on: 30 August, 2017, 07:14:55 »
Hi
 I have taken a look at a couple of oil pumps that my dad has got and they all seemed to have scoring to the plate this must be where the gears spin but even when you reface the outer cover I believe that the scoring would return in time as they bolt together unless anybody else has any better answer I would just rebuilt it and check the oil return to the tank when you start the bike
Andy1953 :)

5
Singles / 1953 b31 plunger gearbox
« on: 27 August, 2017, 07:21:40 »
hi hope some one will be able to help i am in the process of putting my dad,s bsa back on the road and i am having trouble with the gearbox 3rd gear will not engage properly it seem to need 2 stabs at getting it in gear all the others work fine i have had the box apart and looking at the manual it looks like its all there  is there anything else i need to look at
regards
   andy1953 ;)

Pages: [1]