Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - royblackburn1@btinternet.

Pages: [1]
The Star and Garter / cotter pin
« on: 15 February, 2018, 10:51:52 »
hi all can anyone recommend a mail order firm that stocks hard metal cotter pin for a A65 thanks Roy

Twins / reluctant starter
« on: 13 November, 2017, 17:41:21 »
Hi can anyone help before my right foot is damaged beyond repair my A65L is a poor starter when it was running the timing was set up using a strobe but refuses to start at times I have 12.6 volts at the battery when trying to start it is this enough volts to get the Boyer Bransden ignition working my concentric carbs do not have pilot jets in even when they where bought new would pilot jets help when easy start is squirted in it fires up. thanks Roy

The Star and Garter / ammeter query
« on: 20 October, 2017, 17:43:15 »
Hi I have a 1966 lightning with Boyer Bransden ignition and modern rectifier/zener diode when I turn the ignition on  the ammeter needle goes to -3 for a couple of seconds then returns to zero is this normal or is there a fault somewhere, thanks Roy

The Star and Garter / boyer bransden ignition
« on: 25 September, 2017, 10:33:23 »
Hi how can I check my boyer bransden ignition is working ok in situ had to lift engine to change oil feed o rings so removed coils to get at engine mounting  bolts now engine running rough,thanks Roy

Twins / A65L engin and frame number
« on: 15 March, 2017, 14:55:14 »
Hi before I get in touch with the dating officer can anyone help my log book says my A65L is 1966 and my engine number is A65L146** which it is and my frame number which I cannot find is the same I have been told that it is actually a 1970, can someone shed some light please

Twins / carb jet confusion
« on: 09 March, 2017, 12:01:07 »
 hi I have a imported 1966 lightning can anyone tell me the correct size jets and needle position for the concentric carbs numbers  932 R300 and 932 L301 I have been told the engine is running rich and why are there so many variations on the same engines through out the years. thanks Roy

The Star and Garter / Word of mouth
« on: 19 February, 2017, 10:34:38 »
Hi can anyone tell me of a engine builder in Nottinghamshire or on its borders, I have heard of one guy who charges 450 plus parts and any machining required is this the norm never had one rebuilt before thanks Roy 

Twins / A65L engine rebuild
« on: 07 February, 2017, 11:37:24 »
Hi I am thinking of rebuilding my A65L engine with limited budget  the SRM way seems very expensive is there anything wrong with the engine as when it came out of the factory theres talk about the timing side bush being rubbish is there bikes out there with engines rebuilt with factory spec internals and running ok I would like to hear from you. Thanks Old miner

Pages: [1]