Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - ANNIS

Pages: [1]
1
Twins / A7 ST plunger air filter box - Fabrication
« on: 06 November, 2017, 12:57:02 »
Hi,

Has anyone got any recommendations as to who might be able to fabricate an air filter box and lid for me?

I have tried several, but so far all I get is yes can do, but we need an original to work from. I don't have this, but I do have several drawings and detail photos, so if you know anyone who can help out it would be appreciated.

Thks.

Richard

2
Twins / A7 ST plunger 1952 - Clock
« on: 17 October, 2017, 11:21:56 »
Trying to find a competition clock to mount alongside the speedo. This to match the setup on the Maudes trophy winning MOL303. I have checked with the National motorcycle museum who has MOL303, but there is no identifying names or numbers on their clock, so I'm struggling.

The clock is black surround and slightly smaller than the speedo, has a 12 hour dial with a reset/timer needle.
Any ideas or suggestions please?


3
Twins / A7 ST petrol tank - best options to flush
« on: 18 September, 2017, 20:00:41 »
Hi, probably a subject thats been raised several times. What is the best options for flushing out a petrol tank that has not been used for some time.
richard

4
Twins / A7 Plunger Air filter box
« on: 12 July, 2017, 17:36:56 »
Hi,

Has anyone got any parts for the airlifter box please they are happy to sell/px etc?
Any bits, but preferably the whole thing would be good.

Looking to put on my '52 ST.

Thanks
Richard

5
Twins / A7ST Tank leaks - weld or liner repair kit?
« on: 02 June, 2017, 18:52:34 »
Bother, after finally putting the bike back together putting fuel in the tank I'm getting leaks around the seams.

Question  - do I try and get the seam re-welded and probably ruin the paintwork, or do I go for one of these tank repair kits?

Thanks

6
The Star and Garter / A7 ST number plates query
« on: 16 April, 2017, 10:49:07 »
Hi, I have an A7ST Nov 1952 reg which I am rebuilding as close as I can to the bikes (correct year and model) which did the Maudes Trophy.
Does anyone know if when I put the front blade number plate on it has to have the correct numbers (ESK 560) on, or can I use one of the Maudes bikes numbers e.g. MOL 303?
I'm guessing the answer legally is no, but interested in your views.

Thanks
Richard

7
Twins / A10 Head id
« on: 12 February, 2017, 13:07:08 »
Folks, trying to find the id on my A10 having removed it and barrels etc.and the only ID i'm picking up on the underside of the fins is  67-3066 or 67-1066. 3rd character is unclear. ID on barrels is 67-1074.
the Head inlet port is 1 1/16th and bore is def 70mm so all seems to fit, but can anyone confirm I'm either looking in the right place or the id is correct.
I have looked in the library parts listing and cant find a match.
Thanks

Richard

Pages: [1]