Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - 6352N19-11

Pages: [1]
1
Singles / tappet adjust check
« on: 24 January, 2018, 09:55:08 »
Hi
can anyone tell me how best to check tappet gap. I find it impossible to get a feeler in level and straight. I have read that some just rely on if there is clearance that is ok or if they can twist the push rod then that is ok.
Your advice would be appreciated
Cheers
Richard

2
Singles / C15 misfires
« on: 24 January, 2018, 09:50:36 »
Hi
My C15 misfires at higher revs. have put the bike back together after 20 years. New wiring loom, new capacitor, new battery, new plug , new HT lead and refurbished carburettor. Started ok but would only run very fast with no misfire. exhaust pipe went red.
Dismantled and rebuilt distributor top end ensuring bob weights in place and working. Kick starts fine first time and idles ok, sometimes have to blip the throttle if cold to keep C15 running then it settles down to tickover. When I twist throttle at higher revs C15 starts to misfire and exhaust pipe goes red again.
have checked settings points and plugs.
Any help appreciated
Cheers
Richard

Pages: [1]