Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - ROYC

Pages: [1] 2 3 ... 6
1
Singles / Re: Grease gun
« on: 10 February, 2018, 16:56:33 »
This is the one I use, it 1s unbranded.

The nozzle grips the nipple and it provides copious quantities of grease. I got it when I had a B40, being aware of the need to keep those swinging arm bushes well greased.
I have one of those guns, best if you get the tins of grease with a tin cover with a hole in for filling the gun.
I suppose that the BSA nipples could be changed to the type for this gun.

2
Singles / Re: Grease gun
« on: 09 February, 2018, 18:54:51 »
I'm looking to get a grease gun for my 1965 BSA B40 - maybe an old secondhand one from ebay? But how do I know what kind of gun will fit the grease nipples on my bike?  Phil (novice)
If it has a nozzle like this , it will fit.

3
The Star and Garter / Re: Bike valuation
« on: 08 February, 2018, 19:37:03 »
Roy

Peter James's insurers accept valuations up to 5k with photos of both sides of the bike.
I paid more than that just for the sidecar.

4
The Star and Garter / Re: Bike valuation
« on: 04 February, 2018, 16:59:43 »
How do I go about getting an Independent Valuation for my insurance company ?

Thanks,
Roy.
I have found a local dealership that will do it.  ;D

5
The Star and Garter / Bike valuation
« on: 03 February, 2018, 08:51:14 »
How do I go about getting an Independent Valuation for my insurance company ?

Thanks,
Roy.

6
The Star and Garter / 60th Anniversary Calendar
« on: 15 January, 2018, 12:29:58 »
Thank you very much for the 60th anniversary calendar.
Club started the same year as my bike.
Roy.

7
Twins / Re: Where to fit an external oil filter on my A65L (pre OIF)
« on: 13 January, 2018, 08:14:52 »
I am going to fit mine in the toolbox.

8
Twins / Re: TLS diagram
« on: 09 January, 2018, 12:00:32 »
I presume you fitted the spacer behind the bearing?
Julian, you've got me out of the soup again.
I had fitted the spacer, but on the wrong side of the bearing.
Rebuilt it according to your diagram and it fits, looks and works much better
Thanks once again,
Roy.

9
Twins / Re: TLS diagram
« on: 09 January, 2018, 06:29:00 »
I presume you fitted the spacer behind the bearing?
AAh, I will have to check on that Julian.
Thanks for that.
Roy.

10
Twins / Re: TLS diagram
« on: 08 January, 2018, 20:15:08 »
Diagram from A65 workshop manual. Are you looking for anything in particular?
Thanks for that Julian.
I wanted to see if I had lost a spacer washer that fitted round the spindle, between the brake plate and the bearing.
When I fitted the TLS to my A7ss I used the A7 spindle, When I tightened the nut up that holds the brake plate on, it locked the plate solid (would not turn in the drum)
I have made a spacer washer about 4mm thick.
Now the nut will tighten up tight and the brake plate will turn freely in the drum.

The spacer fits where the arrow is pointing.

Roy.

11
Twins / TLS diagram
« on: 08 January, 2018, 17:14:51 »
Can anyone point me to a diagram of the Twin Leading Shoe brake hub ?

12
Singles / Re: B44 Shooting Star paint code
« on: 06 January, 2018, 07:08:30 »
I had my paint for my 1958 SS from RS Paint. Colour is bang on.

Roy.

13
Triples / Re: MK1 paint
« on: 24 December, 2017, 07:45:05 »
I had my paint from RS motorcycle paints. It's expensive but the colour is bang on.
The painter that did my paintwork said that it is a pleasure to use, top quality paint.  You can check your colour here -   http://www.rsbikepaint.com/en-gb/colours.php#makeid=24&modelid=613&prodyear=1969 
Cheers,
Roy.

14
The Star and Garter / Re: BSAOC future .
« on: 22 December, 2017, 15:00:18 »
I have heard that in twenty years time all petrol & diesel engines are being banned, so petrol will not be required.
What will vintage vehicles use for fuel ?

15
Singles / Re: B44/C15 tool box under seat.
« on: 12 December, 2017, 16:06:22 »

No danger of coming off on the road, unless you are throw of the saddle on a bump.
Mick

When you come back down the spanners are just in the correct place for your nuts.  :-[

Pages: [1] 2 3 ... 6