BSA Owners' Club Forum

The BSA Workshop => Twins => Topic started by: BARNFIELD on 08 November, 2017, 18:47:45

Title: Super Rocket head torque
Post by: BARNFIELD on 08 November, 2017, 18:47:45
Can anyone advise on the correct torque value for Super Rocket cylinder head bolts. Thanks, Greg
Title: Re: Super Rocket head torque
Post by: Bess on 08 November, 2017, 20:22:41
Hi BARNFIELD,
                       Did you see your original post answers?

Best wishes...
Title: Re: Super Rocket head torque
Post by: BARNFIELD on 08 November, 2017, 22:54:57
Checked to make sure was posted but couldn't see it, hence posting a second time. Can't find any answers tho'.
Title: Re: Super Rocket head torque
Post by: DEREKANDERSON8 on 09 November, 2017, 07:51:55
 ;) 

http://www.bsaownersclub.co.uk/bsaoc_forum/index.php?topic=1889.msg8093;topicseen#msg8093


Title: Re: Super Rocket head torque
Post by: Bess on 09 November, 2017, 09:45:06
Hi,
    I have attached the complete A65 torque settings.

There is a service sheet describing the thick washers Julian mentioned, I cant find it at the moment. The dimensions are 3/8" X 5/8" X .104", I purchased some washers with a O/D diameter  larger than 5/8" to get the thickness and turned them down. If you not got a lathe, put 5 on a fully threaded bolt, lock them with a nut and grind them down to size.

Best wishes...